Hey guy's! Can someone confirm your Rough settings in Generator Parameters, and the Skim settings: I had to reload my software and .tec files and my machine is suddenly running 1/4 of the speed it used to. Cutting around 2.75 In/hour for a .75" thick 3/8 dowel!!!! Used to take me around 15 minutes for the rough and the skim. I am at 15 and only half way done with the rough?

Here are my settings for Rough, Skim (this is for .75" thick 4140 hardened steel).

E 501

EL:15
PA:6
ST:1
M:1
V:-80
IAL:16
B:4.0
A:1.0
TAC: 0.8
AJ:40.0
S:10.000
INJ: 4
WB:1.00
WS:13.0
FF:100

% ST 1 GAUGE IS PEGGED AT 75 MAX?

SKIM CUT SETTINGS:


E 502

EL:15
PA:6
ST:2
M:3
V:-120
IAL:16
B:3.8
A:0.2
TAC: 0.2
AJ:80.2
S:2.190
INJ: 0
WB:1.60
WS:8.0
FF:100

Extremely slow.

Please Help. -Jeremy