Here is the method, power is to Encoder ONLY. Waveform diag. shows all three waveforms at once.
Al.
Thread: Motor encoder alignment
Results 1 to 17 of 17
Threaded View
-
01-21-2006, 05:40 PM #8
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24260
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
HOW TO CHANGE ACTIVE ENCODER FROM LINEAR SCALE TO MOTOR ENCODER IN SIEMENS 840D.
By sandeepmb123 in forum SIEMENS -> Sinumerik 802D/808D/810D/828D/840DReplies: 0Last Post: 01-02-2014, 08:05 PM -
Encoder alignment
By John_B in forum Cincinnati CNCReplies: 3Last Post: 10-04-2011, 12:44 AM -
Commutation Signals alignment to the motor shaft
By wahidbashir in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 12-20-2010, 06:28 PM -
Problems with motor stalling due to motor/lead screw alignment
By Bimmerkc1 in forum DIY CNC Router Table MachinesReplies: 3Last Post: 01-25-2010, 01:12 AM -
How to tell if my motor is Pulse encoder or quadrature encoder?
By Darc in forum Servo Motors / DrivesReplies: 0Last Post: 07-22-2005, 09:51 AM
Tags for this Thread
Posting Permissions
