1. Motorized Up and down platform not moving
https://www.youtube.com/watch?v=8uNVgVsCa6U&feature=youtu.be"]http://https://www.youtube.com/watch?v=8uNV...ature=youtu.be[/URL]
Results 1 to 11 of 11
-
08-15-2013, 03:35 PM #1
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
Soluion Videos for Common Laser Problems
-
08-15-2013, 03:37 PM #2
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
Laser tube problem or laser power supply problem
2. Laser tube problem or laser power supply problem
Laser tube problem or Laser powersupply problem - YouTube
-
08-15-2013, 03:39 PM #3
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
-
08-15-2013, 03:41 PM #4
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
-
08-15-2013, 03:43 PM #5
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
-
08-15-2013, 03:45 PM #6
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
Switch Test if whole machine no electric
6. Switch Test if whole machine no electric
Switch test if whole machine no electric - YouTube
-
08-15-2013, 06:03 PM #7
Registered
- Join Date
- Jul 2007
- Posts
- 53
I have to say, while I don't ever see myself going the whole "china" import route for a new machine. And I have seen so many of the china wannabe manufactureres here hawking their product every chance they get. Melody and G.Weike have consistantly been on this forum answering questions, offering help (even on other machines). I have to give a "thumbs up" to them. If I ever were in the market to import they would most likely be my first choice...
-
09-04-2013, 12:39 AM #8
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
7. Test if the green light of psu is off
GWEIKE test for green light of power is off - YouTube
-
09-05-2013, 09:59 AM #9
Registered
- Join Date
- Jun 2010
- Posts
- 34
Great videos! I'm very glad to see these. Gweike continues to hold my confidence. Keep up the good work!
-
09-06-2013, 12:20 PM #10
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
8. Laser Psu light &ammeter value at noral working mode
laser power suply light &ammeter value at noral working station - YouTube
-
09-23-2013, 12:21 PM #11
Company Representative
- Join Date
- Sep 2011
- Posts
- 296
Test if the yellow light of psu is off
9. Test if the yellow light of psu is off
GWEIKE test for yellow light of power - YouTube
Reply With QuoteSimilar Threads
-
Common Laser Problems and Solutions(1) - Y Axis movement issue on "Test"
By Gweikelasers in forum Laser Engraving / Cutting Machine General TopicsReplies: 3Last Post: 12-22-2016, 10:45 PM -
Common Chinese Co2 Laser Problems & Solutions
By Gweikelasers in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 02-20-2013, 02:21 AM -
TL15 Common Problems
By rrbmachining in forum Haas LathesReplies: 3Last Post: 05-21-2010, 06:16 PM -
Some Common Problems of Laser Engraver and Solutions
By smartman in forum Laser Engraving / Cutting Machine General TopicsReplies: 0Last Post: 03-22-2010, 11:01 AM -
Common Machining Problems
By MecInd in forum MetalWork DiscussionReplies: 6Last Post: 01-28-2009, 03:06 AM
Posting Permissions
