you may put filament lamps instead of fuses when testing your drive and don't blow the fuses
besides there have to be settings on the PCB to increase firing angle of thyristors (decrease the current)
you may put filament lamps instead of fuses when testing your drive and don't blow the fuses
besides there have to be settings on the PCB to increase firing angle of thyristors (decrease the current)
I'm going through the Z axis motor as well, it still shows OVC on that drive. I have TGLS on the X drive and the motor ran away when I powered on. After I get that done I will look at the settings on the PCBs...