603,953 active members*
3,726 visitors online*
Register for free
Login

Thread: PRO4896-34 planning and build log

Results 1 to 20 of 57

Hybrid View

seesoe PRO4896-34 planning and build... 07-12-2013, 12:01 PM
ahren Hey Sammy, I'd go with a... 07-12-2013, 10:12 PM
seesoe thanks for the feedback... 07-14-2013, 07:13 AM
seesoe hey everyone, here is some... 08-09-2013, 01:34 AM
seesoe i got the base built last... 08-15-2013, 11:50 PM
sdantonio Hi, COnsider a wooden... 09-03-2013, 12:24 AM
seesoe Steven, thank you for the... 09-06-2013, 05:50 AM
vinsonelt Re: PRO4896-34 planning and... 05-25-2014, 06:21 PM
seesoe Re: PRO4896-34 planning and... 05-25-2014, 08:02 PM
seesoe my vfd and 2.2kw spindle from... 09-06-2013, 06:11 AM
seesoe i have a lot of little things... 09-11-2013, 04:39 AM
seesoe I still have a some cleanup... 09-17-2013, 03:02 AM
seesoe i'm using a 2.2kw water... 09-17-2013, 03:26 AM
standles Love the build notes. I am... 11-17-2013, 03:49 AM
seesoe standles, thanks, i pretty... 11-18-2013, 01:03 AM
InControl Tech Thanks for doing a build... 11-30-2013, 10:00 PM
InControl Tech What PSUs are you using? I'm... 12-01-2013, 02:36 AM
seesoe a 2nd parallel port pci card... 12-09-2013, 06:53 AM
Gorilla83 Also curious here as to what... 12-17-2013, 03:20 PM
seesoe I am using PSU's from ebay... 12-17-2013, 10:18 PM
seesoe Re: PRO4896-34 planning and... 11-10-2014, 08:57 AM
seesoe Re: PRO4896-34 planning and... 11-11-2014, 01:05 AM
seesoe Re: PRO4896-34 planning and... 11-13-2014, 04:14 AM
Frankmali17 Re: PRO4896-34 planning and... 11-13-2014, 01:55 PM
seesoe Re: PRO4896-34 planning and... 11-15-2014, 10:34 PM
Frankmali17 Re: PRO4896-34 planning and... 11-15-2014, 11:32 PM
Frankmali17 Re: PRO4896-34 planning and... 11-15-2014, 11:33 PM
seesoe Re: PRO4896-34 planning and... 11-19-2014, 01:56 AM
seesoe Re: PRO4896-34 planning and... 11-19-2014, 02:03 AM
Frankmali17 Re: PRO4896-34 planning and... 11-19-2014, 12:57 PM
seesoe Re: PRO4896-34 planning and... 11-20-2014, 01:31 AM
seesoe Re: PRO4896-34 planning and... 11-25-2014, 01:57 AM
alevitt53 Re: PRO4896-34 planning and... 01-01-2015, 11:01 PM
Frankmali17 Re: PRO4896-34 planning and... 11-25-2014, 02:39 AM
seesoe Re: PRO4896-34 planning and... 12-03-2014, 05:02 AM
HDTHEATER Re: PRO4896-34 planning and... 12-03-2014, 05:37 AM
alevitt53 Re: PRO4896-34 planning and... 01-02-2015, 02:01 AM
seesoe Re: PRO4896-34 planning and... 12-03-2014, 07:11 AM
seesoe Re: PRO4896-34 planning and... 12-08-2014, 02:42 AM
seesoe Re: PRO4896-34 planning and... 12-09-2014, 07:29 AM
seesoe Re: PRO4896-34 planning and... 12-21-2014, 01:30 AM
seesoe Re: PRO4896-34 planning and... 12-25-2014, 06:39 AM
BrianJenkins Re: PRO4896-34 planning and... 01-09-2015, 06:07 AM
seesoe Re: PRO4896-34 planning and... 01-12-2015, 07:58 AM
HDTHEATER Re: PRO4896-34 planning and... 04-07-2015, 05:37 AM
seesoe Re: PRO4896-34 planning and... 12-29-2014, 03:14 AM
groc426 Re: PRO4896-34 planning and... 12-29-2014, 07:51 PM
seesoe Re: PRO4896-34 planning and... 12-29-2014, 08:11 PM
Frankmali17 Re: PRO4896-34 planning and... 01-01-2015, 11:44 PM
seesoe Re: PRO4896-34 planning and... 01-02-2015, 01:49 AM
seesoe Re: PRO4896-34 planning and... 01-12-2015, 07:42 AM
alevitt53 Re: PRO4896-34 planning and... 01-12-2015, 03:01 PM
IMOKRUOK100 Re: PRO4896-34 planning and... 07-27-2017, 02:25 AM
TransAmGuy Re: PRO4896-34 planning and... 04-08-2015, 03:55 AM
CLaNZeR Re: PRO4896-34 planning and... 04-19-2015, 05:23 PM
seesoe Re: PRO4896-34 planning and... 07-10-2015, 03:10 AM
seesoe Re: PRO4896-34 planning and... 07-10-2015, 03:31 AM
  1. 12-01-2013, 02:36 AM #1
    InControl Tech is offline Registered
    Join Date
    Nov 2013
    Posts
    1
    What PSUs are you using? I'm starting plans for a PRO4848 and plan to copy a lot of your! Also any reason you didn't go with Smooth Stepper instead of adding the 2nd parallel port?
    Reply With Quote Reply With Quote
  2. 12-09-2013, 06:53 AM #2
    seesoe is offline Registered
    Join Date
    Sep 2011
    Posts
    65
    a 2nd parallel port pci card was faster to setup at the time. also i feel like its more native to use that way. not to mention the obvious cost difference as well.

    Quote Originally Posted by InControl Tech View Post
    What PSUs are you using? I'm starting plans for a PRO4848 and plan to copy a lot of your! Also any reason you didn't go with Smooth Stepper instead of adding the 2nd parallel port?
    Reply With Quote Reply With Quote
  3. 12-17-2013, 03:20 PM #3
    Gorilla83 is offline Registered
    Join Date
    Jun 2013
    Posts
    25
    Also curious here as to what PSUs you are using. I also like the idea of not having a single point of failure for everything. Which PSU do you use to connect to the BOB?
    Reply With Quote Reply With Quote
  4. 12-17-2013, 10:18 PM #4
    seesoe is offline Registered
    Join Date
    Sep 2011
    Posts
    65
    Quote Originally Posted by Gorilla83 View Post
    Also curious here as to what PSUs you are using. I also like the idea of not having a single point of failure for everything. Which PSU do you use to connect to the BOB?
    I am using PSU's from ebay China, the price has gone up $6-7 since i last looked a few weeks ago. The PMDX BOB runs off the mains line.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Australian PRO4896-34 Build Log
    By nickpeters in forum Avid CNC
    Replies: 19
    Last Post: 06-23-2017, 01:55 AM
  2. First Build Help (Planning)
    By Rezort in forum Australia, New Zealand Club House
    Replies: 25
    Last Post: 11-28-2013, 01:48 PM
  3. First Build Help (Planning)
    By Rezort in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 11-15-2013, 04:30 AM
  4. newbie-planning build
    By sabastion in forum X3/SX3/G0619/G0463
    Replies: 0
    Last Post: 08-02-2011, 10:45 PM
  5. Planning to build a CNC router
    By blue_can in forum DIY CNC Router Table Machines
    Replies: 26
    Last Post: 06-10-2008, 11:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules