I'm looking to have made 50 round wood dowels with a concave tip in one end. The diameter is .666" and length 5.90". Type of wood not of importance (birch, oak, maple, hickory, ash will all work well). I guess the illustration explains the concept better than me:
I'll supply better and more detailed drawings for the winner. PM me for quotes!
Results 1 to 4 of 4
-
09-22-2014, 10:12 AM #1
Registered
- Join Date
- Sep 2007
- Posts
- 9
RFQ: Wood dowels with concave tip
-
09-22-2014, 04:50 PM #2
Registered
- Join Date
- Aug 2010
- Posts
- 128
Re: RFQ: Wood dowels with concave tip
What kind of tolerances would you expect?
-
09-22-2014, 08:23 PM #3
Registered
- Join Date
- Sep 2007
- Posts
- 9
Re: RFQ: Wood dowels with concave tip
+/- .003–004" is OK for the diameter. Length is not critical at all. The concave tip is not that critical either.
-
10-20-2014, 09:48 PM #4
Registered
- Join Date
- Oct 2014
- Posts
- 6
Re: RFQ: Wood dowels with concave tip
Deleted
Similar Threads
-
Dowels and Part Flipping
By JMBush01 in forum Work Fixtures / Hold-Down SolutionsReplies: 1Last Post: 11-04-2013, 09:24 PM -
RFQ - Small metal dowels
By LotharSys in forum RFQ (Request for Quote)Replies: 8Last Post: 06-17-2011, 02:36 PM -
Concave pocket How to
By BigC in forum BobCad-CamReplies: 17Last Post: 07-23-2010, 02:12 PM -
Concave Milling
By Travisty in forum MastercamReplies: 8Last Post: 10-20-2009, 01:56 PM -
Noob alert: How to indicate dowels parallel on a CNC
By Alarm Hero in forum MetalWork DiscussionReplies: 6Last Post: 07-30-2008, 04:25 AM
Tags for this Thread
Posting Permissions
