I think we are talking about 2 different things. What coop31 gave us is the BIOS settings that are in the Workstation board (far left board) and are retained by a 2032 watch battery. What you lost by changing the 2032 battery in the REAL TIME board (far right board) is the complete BIOS. This needs to be re-flashed to work correctly. The BIOS settings are different depending on the type of processor and board/part number. There are people on this site that can re-flash the BIOS or, you can send it to SIEMENS 1-800-879-8079. You need to look at the similar posts about this subject. Let us know what happens.
hi everyone
i get an AT power supply and AT keyboard and old VGA card and i run the RT board to set the bios
of it ,the alarm for output fuse is gone but still tow alarms (servo.config) and (problem mapping pendant/panel)
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.