There are several versions of the 10, You would need a Maintenance manual at least, you then should be able to match your machine up to the types shown by diagram.
Mostly the control is single phase 200vac. The control and power supply is fed through the Input Unit, if you look on yours, there will either be 3ph in shown as R,S,T or just R,S for single phase in to the input unit, the power suppy itself is fed from the Input Unit and is single phase in.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.