588,684 active members*
6,056 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > MadCAM > Post processor missing tool number and feed rates

Thread: Post processor missing tool number and feed rates

Results 1 to 20 of 20

Hybrid View

  1. 02-26-2015, 07:32 AM #1
    dwneumann
    dwneumann is offline Registered
    Join Date
    Jan 2009
    Posts
    49
    Quote Originally Posted by svenakela View Post
    Give me an example.
    As long as Mr Corvus can't argue why he is using a several years old version I will stand uncorrected.
    Just because he's using an old version don't accuse him of theft. I also use MadCam 4.3 and the reason is because the upgrade to v5 costs $300 and requires a $500 upgrade to rhino5 as well. Hard to swallow.

    By the way, are you still using Windows 7? Office 2012? Mach3?
    Reply With Quote Reply With Quote
  2. 02-27-2015, 10:24 PM #2
    Dan B
    Dan B is offline Moderator
    Join Date
    Apr 2003
    Posts
    1357

    Re: Post processor missing tool number and feed rates

    Quote Originally Posted by dwneumann View Post
    I also use MadCam 4.3 and the reason is because the upgrade to v5 costs $300 and requires a $500 upgrade to rhino5 as well. Hard to swallow.
    You are doing yourself a disfavor by not upgrading. Both madCAM and Rhino have evolved by leaps and bounds from the version you are using. Just sayin'...
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. cutter leaving feed lines at high feed rates-walter prototyp end mill
    By shimmwagen in forum CNC Tooling
    Replies: 0
    Last Post: 01-23-2014, 08:54 PM
  2. Post Processor Missing
    By Jumbucks in forum Hypermill
    Replies: 1
    Last Post: 06-17-2011, 04:06 AM
  3. GWizard settings or other tool for speed/feed rates for Taig Mill?
    By awetmore in forum Taig Mills / Lathes
    Replies: 2
    Last Post: 04-25-2010, 11:04 PM
  4. Missing Tool Number
    By barbter in forum NCPlot G-Code editor / backplotter
    Replies: 1
    Last Post: 10-04-2008, 04:07 PM
  5. Tool Feed rates/RPM way too aggressive?
    By Rich05 in forum Mastercam
    Replies: 17
    Last Post: 07-06-2008, 03:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules