will have to try setting a high value and see what i get for my facing cutting speed....stands to reason if 80 creates 11ipm ...160 should double it...?
Thread: cutting rates?
Results 1 to 6 of 6
Threaded View
-
02-17-2016, 05:14 PM #3
Registered
- Join Date
- Oct 2007
- Posts
- 446
Re: cutting rates?
Reply With QuoteSimilar Threads
-
Drilling Aluminum / cutting - Feed rates and RPM - Can't keep braking bits =(
By FoxCNC1 in forum Material Machining SolutionsReplies: 17Last Post: 09-11-2014, 05:34 AM -
MDF cutting bit that can accept low feed rates
By ben_mtl in forum CNC ToolingReplies: 11Last Post: 08-30-2013, 02:02 PM -
Cutting rates for tellurium copper
By Silentelk in forum Material Machining SolutionsReplies: 4Last Post: 04-27-2008, 09:03 PM -
What cutting rates for a Plasma?
By Normsthename in forum Waterjet General TopicsReplies: 6Last Post: 12-03-2007, 12:06 AM -
Cutting table rates... piece or hourly
By PlasmaGuy in forum Waterjet General TopicsReplies: 5Last Post: 11-25-2007, 06:47 PM
Tags for this Thread
Posting Permissions
