Originally Posted by
baronjutter
Thanks for the quick reply! I'm not sure if I'm "uploading firmware". I'm using the options within the lasercad software which communicates with the laser controller, it's reading settings off the machine and then saving those settings to the machine.
We are using the "lasercad" software that came with the X7 DSP controller, it's set to mm and no scale options.
It's perfectly consistently out of scale depending on what we have the machine's X and Y scale values set to (something about pulses?). Lowering the number makes the cutting bigger, increasing it makes it smaller. I'm away from the machine right now but I can take screen shots and get more info if it will help solve things.