I don't have pics but...
We have a 4x8 kit built CNC from Build Your CNC (??) at our MakerSpace [URL="http://www.slomakerspace.com"] It holds a 49"x97" sheet of mdf. I used a biscuit cutter to cut slots in the edges of the mdf about every 10" then inserted 2" fender washers in the slots and screwed the washers down to the main table.
Screws are totally out of the way of the bit.
Results 1 to 13 of 13
Threaded View
-
04-05-2016, 09:19 PM #9
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 7
Re: Question on spoilboard attachement- Question
Reply With QuoteSimilar Threads
-
Spoilboard question..
By SixOfOne in forum DIY CNC Router Table MachinesReplies: 5Last Post: 02-10-2016, 09:26 PM -
Lines while engraving with laser & rotary attachement
By blh8426 in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 01-10-2016, 04:27 AM -
Pictures of Micro Mill with Power Feed Attachement
By Dennis Bohlke in forum Taig Mills / LathesReplies: 0Last Post: 09-09-2014, 09:04 PM -
picked up a new attachement ..should be fun to use with Bobcad V25
By Big Chips in forum BobCad-CamReplies: 9Last Post: 08-01-2013, 10:25 PM
Tags for this Thread
Posting Permissions
