Originally Posted by
jmille25
About ready to pull the trigger and order servos and drives from DMM, but want some reassurance from others. I was originally planning on using their 750W servos, but after talking to a member of their tech support, he recommended the 400W servos. Before I spend a non-zero amount of time making adapter plates and bushings...do the 400W servos sound reasonable? So far DMM has been extremely helpful and their customer service top notch, I just really don't want make things twice...
The BTC has 2:1 reductions on XYZ. Info on the current DC servos...
Kt 1.68 in-lb/amp
Ke 19.8V/1000rpm
Jm 0.0092 in-lb/sec^2
Amp cont. 6.3
Amp peak 58
RPM 4000 max
Any help would be greatly appreciated,
Josh