603,963 active members*
1,908 visitors online*
Register for free
Login

Thread: CNC egg shell carving

Results 1 to 20 of 129

Hybrid View

uvvvvw CNC egg shell carving 11-16-2015, 04:56 PM
uvvvvw Re: CNC egg shell carving 01-17-2016, 05:42 PM
uvvvvw Re: CNC egg shell carving 02-28-2016, 02:16 PM
victorofga Re: CNC egg shell carving 01-17-2016, 06:29 PM
uvvvvw Re: CNC egg shell carving 01-18-2016, 03:51 AM
jcarpenter2 Re: CNC egg shell carving 01-18-2016, 12:29 AM
mactec54 Re: CNC egg shell carving 01-18-2016, 04:15 AM
uvvvvw Thx mactec Your machine is... 01-18-2016, 04:26 AM
uvvvvw Re: CNC egg shell carving 01-22-2016, 04:49 PM
mactec54 Re: CNC egg shell carving 01-22-2016, 07:10 PM
JohnReierson Re: CNC egg shell carving 02-11-2016, 04:29 AM
A_Camera Re: CNC egg shell carving 02-11-2016, 02:20 PM
uvvvvw Re: CNC egg shell carving 02-11-2016, 03:40 PM
SignTorch Re: CNC egg shell carving 02-11-2016, 09:55 PM
hdnhpa Re: CNC egg shell carving 02-14-2016, 10:00 PM
JohnReierson Re: CNC egg shell carving 02-12-2016, 08:24 AM
uvvvvw Re: CNC egg shell carving 02-12-2016, 09:25 AM
JohnReierson Re: CNC egg shell carving 02-12-2016, 09:47 AM
uvvvvw Re: CNC egg shell carving 02-12-2016, 09:55 AM
Mr.Chips Re: CNC egg shell carving 12-20-2016, 08:14 PM
uvvvvw Re: CNC egg shell carving 12-20-2016, 10:47 PM
asuratman Re: CNC egg shell carving 02-12-2016, 01:34 PM
uvvvvw Re: CNC egg shell carving 02-12-2016, 02:34 PM
JohnReierson Re: CNC egg shell carving 02-12-2016, 08:10 PM
uvvvvw Re: CNC egg shell carving 02-13-2016, 04:50 AM
squirrel_41 Re: CNC egg shell carving 02-13-2016, 03:57 PM
uvvvvw Re: CNC egg shell carving 02-13-2016, 04:23 PM
squirrel_41 Re: CNC egg shell carving 02-13-2016, 05:07 PM
squirrel_41 Re: CNC egg shell carving 05-01-2016, 01:22 PM
uvvvvw Re: CNC egg shell carving 05-01-2016, 02:58 PM
squirrel_41 Re: CNC egg shell carving 05-04-2016, 03:51 PM
uvvvvw Re: CNC egg shell carving 05-01-2016, 09:04 AM
dharmic Re: CNC egg shell carving 02-28-2016, 11:53 PM
uvvvvw 19 hours ! 02-29-2016, 02:02 AM
uvvvvw 19 hours ! 02-29-2016, 02:19 AM
uvvvvw Re: CNC egg shell carving 05-27-2016, 08:52 AM
uvvvvw Re: CNC egg shell carving 10-31-2016, 02:07 AM
SignTorch Re: CNC egg shell carving 02-29-2016, 02:26 AM
uvvvvw Re: CNC egg shell carving 09-08-2016, 04:19 PM
mactec54 Re: CNC egg shell carving 09-08-2016, 06:15 PM
uvvvvw Re: CNC egg shell carving 09-08-2016, 11:58 PM
uvvvvw Re: CNC egg shell carving 03-09-2016, 09:31 AM
RCaffin Re: CNC egg shell carving 05-01-2016, 12:33 PM
PAPACAI Bunos dias . busco planos... 05-01-2016, 12:47 PM
dharmic Re: CNC egg shell carving 05-01-2016, 02:19 PM
RCaffin Re: CNC egg shell carving 05-04-2016, 10:23 PM
uvvvvw Re: CNC egg shell carving 05-06-2016, 03:13 PM
aarggh Re: CNC egg shell carving 09-09-2016, 01:57 AM
uvvvvw Re: CNC egg shell carving 09-18-2016, 11:39 AM
RCaffin Re: CNC egg shell carving 09-18-2016, 01:03 PM
uvvvvw Re: CNC egg shell carving 09-18-2016, 01:34 PM
RCaffin Re: CNC egg shell carving 09-18-2016, 10:09 PM
uvvvvw Re: CNC egg shell carving 09-22-2016, 05:36 PM
uvvvvw Re: CNC egg shell carving 09-23-2016, 02:37 PM
uvvvvw Re: CNC egg shell carving 10-26-2016, 04:17 PM
RCaffin Re: CNC egg shell carving 10-31-2016, 02:26 AM
uvvvvw Re: CNC egg shell carving 10-31-2016, 03:15 AM
RCaffin Re: CNC egg shell carving 10-31-2016, 04:06 AM
uvvvvw Re: CNC egg shell carving 11-02-2016, 05:17 PM
mactec54 Re: CNC egg shell carving 11-02-2016, 06:30 PM
uvvvvw Re: CNC egg shell carving 11-08-2016, 03:09 PM
RCaffin Re: CNC egg shell carving 11-08-2016, 09:42 PM
lamtldealer Re: CNC egg shell carving 11-09-2016, 12:21 AM
uvvvvw Re: CNC egg shell carving 11-09-2016, 09:12 AM
Merlin201314 Re: CNC egg shell carving 11-10-2016, 11:12 AM
uvvvvw Re: CNC egg shell carving 11-23-2016, 11:14 AM
newlife Re: CNC egg shell carving 11-24-2016, 12:06 AM
uvvvvw Re: CNC egg shell carving 11-24-2016, 06:09 AM
newlife Re: CNC egg shell carving 11-24-2016, 02:17 PM
uvvvvw Re: CNC egg shell carving 11-24-2016, 03:05 PM
uvvvvw Re: CNC egg shell carving 12-20-2016, 02:49 PM
Mr.Chips Re: CNC egg shell carving 12-20-2016, 07:57 PM
steve323 Re: CNC egg shell carving 12-20-2016, 08:57 PM
uvvvvw Re: CNC egg shell carving 12-20-2016, 10:50 PM
uvvvvw Re: CNC egg shell carving 12-26-2016, 03:47 PM
uvvvvw Re: CNC egg shell carving 01-30-2017, 06:19 AM
RCaffin Re: CNC egg shell carving 01-30-2017, 06:25 AM
uvvvvw Re: CNC egg shell carving 01-30-2017, 06:47 AM
uvvvvw Re: CNC egg shell carving 02-22-2017, 03:14 PM
uvvvvw Re: CNC egg shell carving 02-25-2017, 04:37 AM
newlife Re: CNC egg shell carving 02-25-2017, 05:15 PM
uvvvvw Re: CNC egg shell carving 02-25-2017, 06:11 PM
coherent Re: CNC egg shell carving 02-25-2017, 04:19 PM
uvvvvw Re: CNC egg shell carving 02-25-2017, 05:01 PM
uvvvvw Re: CNC egg shell carving 10-07-2017, 11:10 AM
elephantcnc Re: CNC egg shell carving 02-27-2017, 07:01 AM
uvvvvw Re: CNC egg shell carving 03-12-2017, 05:06 PM
Riky Tiky Tavy Re: CNC egg shell carving 07-11-2017, 05:12 AM
uvvvvw Re: CNC egg shell carving 07-11-2017, 06:33 PM
uvvvvw Re: CNC egg shell carving 04-04-2018, 03:03 PM
harryn Re: CNC egg shell carving 04-04-2018, 05:29 PM
uvvvvw Re: CNC egg shell carving 12-02-2018, 09:05 AM
RCaffin Re: CNC egg shell carving 07-11-2017, 06:33 AM
Riky Tiky Tavy Re: CNC egg shell carving 07-19-2017, 10:34 PM
RCaffin Re: CNC egg shell carving 10-07-2017, 11:21 AM
uvvvvw Re: CNC egg shell carving 10-07-2017, 11:56 AM
RCaffin Re: CNC egg shell carving 10-07-2017, 09:28 PM
uvvvvw Re: CNC egg shell carving 07-01-2018, 09:52 AM
uvvvvw Re: CNC egg shell carving 06-29-2018, 04:37 PM
uvvvvw Re: CNC egg shell carving 12-16-2018, 04:26 PM
uvvvvw Re: CNC egg shell carving 10-09-2017, 11:03 AM
uvvvvw Re: CNC egg shell carving 10-09-2017, 06:02 PM
RCaffin Re: CNC egg shell carving 10-09-2017, 09:22 PM
uvvvvw Re: CNC egg shell carving 02-06-2018, 03:19 PM
RCaffin Re: CNC egg shell carving 02-06-2018, 09:58 PM
uvvvvw Re: CNC egg shell carving 02-07-2018, 02:39 AM
uvvvvw Re: CNC egg shell carving 12-02-2018, 09:03 AM
RCaffin Re: CNC egg shell carving 06-29-2018, 10:49 PM
RCaffin Re: CNC egg shell carving 07-01-2018, 10:49 AM
uvvvvw Air gauging method is a bit... 07-01-2018, 11:08 AM
RCaffin Re: CNC egg shell carving 07-01-2018, 12:42 PM
JimInAshland Re: CNC egg shell carving 07-01-2018, 02:38 PM
uvvvvw Re: CNC egg shell carving 07-01-2018, 03:07 PM
uvvvvw Re: CNC egg shell carving 12-03-2018, 05:43 AM
RCaffin Re: CNC egg shell carving 12-17-2018, 10:21 AM
uvvvvw Thx Roger. I guess it is a... 12-17-2018, 10:52 AM
RCaffin Re: CNC egg shell carving 12-17-2018, 11:13 AM
uvvvvw Oh no! It is too scary. May... 12-17-2018, 04:26 PM
RCaffin Re: CNC egg shell carving 12-17-2018, 09:47 PM
user51u Re: CNC egg shell carving 06-28-2019, 12:50 PM
RCaffin Re: CNC egg shell carving 06-28-2019, 10:23 PM
user51u Re: CNC egg shell carving 07-05-2019, 10:39 AM
user51u Re: CNC egg shell carving 08-15-2019, 06:33 AM
  1. 05-01-2016, 01:22 PM #1
    squirrel_41 is offline Member
    Join Date
    Dec 2009
    Posts
    167

    Re: CNC egg shell carving

    Quote Originally Posted by uvvvvw View Post
    Hi Squirrel,
    Got no idea on the Mach3 probemaster, as I am still using the old Mach2.
    And I wrote my own program to do the probing, used the old Visual Basic 6
    What are these eggs from chicken, duck, emu
    thanks
    Reply With Quote Reply With Quote
  2. 05-01-2016, 02:58 PM #2
    uvvvvw is offline Registered
    Join Date
    Nov 2015
    Posts
    67

    Re: CNC egg shell carving

    Quote Originally Posted by squirrel_41 View Post
    What are these eggs from chicken, duck, emu
    thanks
    Goose mainly.
    Reply With Quote Reply With Quote
  3. 05-04-2016, 03:51 PM #3
    squirrel_41 is offline Member
    Join Date
    Dec 2009
    Posts
    167

    Re: CNC egg shell carving

    Thanks for that I have tried standard egg shells but the shell always break
    they are really thin.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. DIY Laser Shell
    By trotec in forum Australia, New Zealand Club House
    Replies: 4
    Last Post: 11-30-2013, 07:06 AM
  2. Shell Moulding
    By razajahanian in forum MetalWork Discussion
    Replies: 0
    Last Post: 11-09-2010, 11:55 AM
  3. Using a shell mill
    By mrk in forum MetalWork Discussion
    Replies: 5
    Last Post: 08-11-2007, 02:59 PM
  4. Relief carving small detailed parts - V-carving from greyscale image
    By ALAN2525 in forum Uncategorised CAM Discussion
    Replies: 16
    Last Post: 02-12-2007, 12:01 AM
  5. Cutting Shell
    By handersen in forum Glass, Plastic and Stone
    Replies: 1
    Last Post: 07-09-2003, 01:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules