I took the time to model and create the CAM to machine soft jaws for the Tormach SL15 3 jaw chuck and would be happy to share if there is an interest.
David
Results 1 to 5 of 5
Threaded View
-
06-30-2016, 06:46 AM #1
Registered
- Join Date
- Jul 2004
- Posts
- 595
Any interest in SL15 3 Jaw Chuck Soft Jaw Fusion 360 Model and CAM?
Reply With QuoteSimilar Threads
-
Sieg SX3 Fusion 360 CAD model
By Novec in forum Benchtop MachinesReplies: 5Last Post: 06-08-2017, 09:53 PM -
Sieg SX3 Fusion 360 CAD model
By Novec in forum X3/SX3/G0619/G0463Replies: 0Last Post: 05-21-2016, 11:10 AM -
Boring soft chuck jaws for ID holding?
By SRT Mike in forum MetalWork DiscussionReplies: 11Last Post: 03-15-2013, 07:19 PM -
Machining soft jaws on a stationary 3 jaw chuck
By kevbo in forum Work Fixtures / Hold-Down SolutionsReplies: 2Last Post: 01-12-2012, 08:32 AM -
Chuck Jaw Setup Mazak Fusion 640 T need help
By Shotout in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 06-28-2006, 02:17 AM
Tags for this Thread
Posting Permissions
