Originally Posted by
claudiu220405
Hello,
I installed SolidCam 2016 SP2HF3, and having not this problem anymore.
What I can not resolve is that when I generate the g-code, the name of the codument is without spaces.
What can I do to resolve this problem, because I can have g-code file with info in name like - 123 with clamping on 2mm - gcode name is 123withclampingon2mm.
I also have:
max_g_name_lenght = 0 in PRP under ;Internal params
Even if I generate a splited operations even if I generate one operation I have same problem.
Anybody with sollution?
Thank you!
EDIT:
Found the solution with the spaces in name, in machine option(VMID file) in tab Working Style, at Gcode Output is a setting with Allow Spaces in Gcode File nad modyfied to YES.
The problem is another one, after changing this setting, the partname in splitted files is again ti filename-1-1; filaneme-1-2 instead filename-1, filename-2.
Anybody with solution for this?
Even if I put back No to that setting the problem is not solved!
Anything else?
Thank you.