Originally Posted by
robobass
All points taken. I think I'm going to go with the Tricoya. I'm guessing it will perform similarly to my current MDF board, but maybe even better, not to mention that I can work wet. MDF has served me well. In four years I still haven't changed it. I can drill a pattern of mounting holes in minutes, and as long as the pilot size is correct it holds wood screws well, although not indefinitely. Since the Tricoya is only 18mm thick (my existing board is 21mm) I think I'll just mount an aluminum rail or two underneath. Tricoya is available locally and a full board is about $300, but will be enough for three tables. I'll post results in a few months!