Quote Originally Posted by IBICO View Post
I got the HY01D523B 220v and 1.5kw spindle. Had some struggle getting the VI speed adjustment working, so did a factory reset. Now the spindle does not run properly evem following several setup suggestion on this page.
What happen is that the spindle start up really slow and do not gain much speed before I get some error code.

Guessing one of the menu setup are not correct. It worked perfectly before the factory default and the wiring are the same.

Anyone got a tip?
You have some parameter that is not set correct, a slow start up is a bad thing, this can damage the Spindle and VFD, what parameters have you set