[maksi]

Hello,
I have a problem with Amada Pega Fanuc 04PC system.
The machine give me error "1012 pusher parameter off",and stop working.
After re-start the machine the alarm can't clean.Switch off the machine and move back the table on Y-axis,swith on the machine and alarm is cleared.
After start working again the alarm is activated and stop.Then we repeat all again and again to clear the alarm.
The value of parameters are:
N4024 10000000 ;
N4025 10000000 ;
N4026 10000000 .

Can anyone help me?

[deeps05]

Hi , are you still need the info/help?

Regards,
Deepak
+91 9222018538
[email protected]

[Barbwier]

My Amada machines lost all parameters because of long electric failure and the batteries did not hold.
When the power was restored the Amada machines already had lost everything.

Amada Apelio II 357 05PLA( Combi machine Laser Punch )

Amada Pega 244 04PC ( Punch Machine )

Do you have backup parameters for this machines if possible also the MMC parameters.