Gerry, Okay after doing the setup without the G code loaded and it homed saying in the window on the run screen "Material Offset now Calculated in Inches" I loaded the g code I clicked run it moved back to the fixed plate and zeroed. From that postion it moved over the Material area and stopped the message popped up to start spindel so I did and clicked it and it is carving the first tool path. After carving the first tool path it stopped and moved to tool change postion and request "tool change message showed in the window". I changed tools clicked cycle start as it stateded in the window it rezeroed it started the second tool path it seems to be work fine now. It is still running the second tool path I wonder what was going on oh well it is working as before..

As for what line it was stopping on previously I did not notice sorry.

Thank Very Much for all your help.
Lou