The drawbar spring is under a heap of tension and can seriously injure you if you don't take it apart correctly. I think some sort of special clamp is use to hold it when removing it.
I had no problems with the draw bar. I let the preasure off the draw bar by unturning the pull stud Nut and before the end of thread runs out the pressure is zero. Definalty take care here. And count the turns as this is close to the required spring pressure.
I had no problems with the draw bar. I let the preasure off the draw bar by unturning the pull stud Nut and before the end of thread runs out the pressure is zero. Definalty take care here. And count the turns as this is close to the required spring pressure.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.