[OlfCNC]

And by the way you still did not prove why my theory is wrong, you just talking without reasoning. I described why and how it works, you did not why it will now work.

[mactec54]

And by the way you still did not prove why my theory is wrong, you just talking without reasoning. I described why and how it works, you did not why it will now work.

It is up to you to prove that your theory works, not me, you posted that this was easy to do but can't supply any evidence that it can in fact work, until you do it's just BS, I'm talking with experience as a manufacturing designer and developer

I called you out because I knew you had not done this, Closed loop system this is easy to do, None closed loop system it would be quite a task to get this to work, so your theory is dead until you prove other wise

[OlfCNC]

I already proven my theory with describing how it can be done. You described nor proven nothing. You think you know everything because you did some things in your past is your problem not mine.

[mactec54]

I already proven my theory with describing how it can be done. You described nor proven nothing. You think you know everything because you did some things in your past is your problem not mine.

As I said I knew you had not done this, it's just amazing what some people post, (nuts) it would be quite difficult to achieve how you described to do it, you have proven nothing at all with your theory, you are totally clueless as to what is needed to do something like this to make it work :wave:

" I do it everyday not in my past "