[Green0]

Hello Mr. Green0,

Your link to Fanuc's website doesn't bring you anywhere.
https://www.fanucamerica.com/product...dMXXtxsQU8upFA

Last year a Fanuc-tech guy [Fanuc Europe] visit our shop and I asked him about the [FANUC] memory problem.
He advised me the FANUC Memory Card Progam Edit Tool Version: 5.00 - Fanuc A08B-9010-J700/ZZ11
It's for the 30i - 32i series but on our 0i-MF with 512kB memory it works as well, maybe it works on a 0i-MC or a 0i-MD also.
We run some programs up to 3Mb without problems.
Normally when we machine multiple parts all the g-code (absolute-G90-not incremental) are stored in sub-programs.
We shift Work-Offset by G52 so the code is written for only one part, that's something that you also have to do.

You contacted Fanuc but didn't they told you anything about this tool ???
FANUC Memory Card Progam Edit Tool Version: 5.00 - Fanuc A08B-9010-J700/ZZ11

We purchased it at FANUC Europe for only € 20,- ( $23,- ) !!!!!!!!!!! ????????
Contact Fanuc again and ask them about this tool, A08B-9010-J700/ZZ11
It runs only from (PCMCIA) flash card, not from USB, it can run programs up to 2Gb !
You can make changes into the g-code, when you drip-feed or using M198 that's not possible.
This tool is not tape/dnc dripfeeding but it makes a BIN-file and runs from [MEM].

I ask myself, why is this tool not known by Fanuc users or tech-guys ?

Regards,
Heavy_Metal.

That's really totally bazaar. I opened the manual. Read it. Really didn't understand it. It may be the solution. Like all things Fanuc they made it hard to grasp.

Is that not available in the USA?