521,841 active members*
2,238 visitors online*
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > General Waterjet > Flow Water jet - Amplifier Faults and more..
Results 1 to 4 of 4
  1. #1

    Join Date
    Mar 2019
    Posts
    2

    Flow Water jet - Amplifier Faults and more..

    Hi all,

    I am currently having issues with the waterjet which has occurring over the year.
    The main issue is trying to send the machine head to the "machine home" for it's start up routine which follows with "A pause or shut down has been activated. Check Advanced - Diagnostic tool.. to determine the cause of the pause or shut down".
    After going on the " FlowSENSE Diagnostic" tool it shows up with;

    "Amplifier fault shut down"
    " X Axis Amplifier fault"
    " Y Axis Amplifier fault".

    Yet the amplifier's themselves are not showing any Fault codes..
    Any ideas?

  2. #2
    Registered
    Join Date
    Jun 2010
    Posts
    428

    Re: Flow Water jet - Amplifier Faults and more..

    Give me a call....I can help you ....

    MCP Services
    678-548-1483
    Maurice Phelps

  3. #3

    Join Date
    Mar 2019
    Posts
    2

    Re: Flow Water jet - Amplifier Faults and more..

    Quote Originally Posted by MCPservice View Post
    Give me a call....I can help you ....

    MCP Services
    678-548-1483
    Maurice Phelps
    Hi, sorry for the late reply.

    As we are in different time zones i won't be able to call you at a sensible time. Could you list your suggested solutions please?

    Many thanks,
    Jake

  4. #4

    Re: Flow Water jet - Amplifier Faults and more..

    Quote Originally Posted by Jakeyy View Post
    Hi all,

    I am currently having issues with the waterjet which has occurring over the year.
    The main issue is trying to send the machine head to the "machine home" for it's start up routine which follows with "A pause or shut down has been activated. Check Advanced - Diagnostic tool.. to determine the cause of the pause or shut down".
    After going on the " FlowSENSE Diagnostic" tool it shows up with;

    "Amplifier fault shut down"
    " X Axis Amplifier fault"
    " Y Axis Amplifier fault".

    Yet the amplifier's themselves are not showing any Fault codes..
    Any ideas?
    I am currently having the very similar issue that you have had. Did you find a solution to this problem?

Similar Threads

  1. Water flow sensor
    By Mcbride19 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 13
    Last Post: 08-03-2019, 04:34 PM
  2. CW-5200 water chiller flow alarm but flow is fine
    By dogeatdog5 in forum Ebay Ads here
    Replies: 0
    Last Post: 03-12-2018, 11:32 PM
  3. Just bought a Flow Water Jet
    By wileybrett in forum General Waterjet
    Replies: 1
    Last Post: 01-16-2017, 08:55 PM
  4. Recommended water flow.
    By Go-C in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 0
    Last Post: 06-23-2015, 06:05 PM
  5. Water won't flow
    By Pysiek in forum Spindles / VFD
    Replies: 5
    Last Post: 05-30-2015, 04:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •