I'd look at the rack and pinion.
Thread: jerky motion on y axis
Results 1 to 20 of 31
Hybrid View
-
05-26-2019, 02:09 AM #1
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: jerky motion on y axis
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Jerky motion in one direction - x axis
By keshi123 in forum Haas MillsReplies: 1Last Post: 04-12-2014, 06:20 PM -
Jerky motion in one direction - x axis
By keshi123 in forum SIEMENS -> GENERALReplies: 0Last Post: 04-12-2014, 11:17 AM -
Jerky motion in one direction - x axis
By keshi123 in forum Haas MillsReplies: 0Last Post: 04-12-2014, 10:50 AM -
Jerky 3D motion
By SScnc in forum DIY CNC Router Table MachinesReplies: 4Last Post: 05-21-2010, 04:15 AM -
Jerky motion
By Matty Zee in forum G-REXReplies: 9Last Post: 03-28-2010, 08:35 AM
Tags for this Thread
Posting Permissions
