[Terryble24]

No I have more than 60 different VFD Drive manuals so have that Drive on file

Here are the Parameters that should get you going

Mactec54
Huajiang VFD Drive
YL 600/620 110v/120v 1.5Kw Water Cooled
P00.00=400

P00.01=0

P00.04=400

P00.05=400

P00.06=110%

P00.07=140

P00.08=35%

P00.09=120

P00.10=30%

P01.04=110

P03.08=120

P03.09=400

P06.00=0

P06.01=8 ( Acceleration Adjustable )

P06.02=8 ( Deceleration Adjustable )

P07.00=400

P07.08=0

P11.01=110

P11.02=7

P11.03=400

P12.00=7 ( Spindle Rated Amps )

P12.01=110

P12.02=2

P12.03=5

P12.05=14 ( VFD Drive Rated output Amperage )

P12.06=110

Hi Mactec54.. im pretty new to this. Im hoping these settings will work for my 2.2kw air cooled spindle aswell. It seems some of the vfd settings are hard to figure out. Im running a 220v vfd..but the nomenclature is in p.00 format. Any chance you can send me to a post where yhis has been discussed already?