I have a DIY 5' x 5' CNC with 3HP spindle and I usually cut hardwood at around 180ipm and plywood at around 300ipm and I'm wondering if anyone knows what dust collection CFM this requires?

I moved up from a Shapeoko where I used a Fein shop vac and it worked well, but it's not cutting it with the new CNC. I want a dedicated DC for the machine, but want to take up as little space as possible. Wondering what others are using that works and if anyone knows actual CFM numbers that I would need for this. I am using the Kent CNC dust boot.

Thanks!