Hello. How to remove the Z70 error in controlling the traub tx8h lathe. I have blocked 2 Z Axes.
Hello. How to remove the Z70 error in controlling the traub tx8h lathe. I have blocked 2 Z Axes.
Seems like the home position is lost?
If its an absolute system, check the battery voltage on drive unit.
If incremental, please do the initial referencing of all axis
Already the error has been removed. I have a problem with spindle S1.G1 for mm / U does not work, and the C axis does not turn on. I need parameters for S1. I think there is a bug there. Simodrive 611 drive. Can anyone help?
error de drive axis