603,319 active members*
2,429 visitors online*
Register for free
Login
Results 1 to 14 of 14

Hybrid View

  1. #1
    Join Date
    Jan 2005
    Posts
    15362

    Re: DYN2 drive issues

    Quote Originally Posted by Travis1581 View Post
    I just ordered some 20 amp fuses and will try this once they arrive (the 11th). Just out of curiosity, what wires are you twisting, power or signal? That setup is a lot cleaner than what I am working with.
    When you said 20 Amp Fuses, I hope that you are not using them in place of the 15A how you had it wired before, if so the same thing could happen, only ( 1 ) fuse and placed before the caps is the only place you can have a fuse in this design

    For wire being Twisted all except Ground
    Mactec54

  2. #2
    Join Date
    Jul 2014
    Posts
    14

    Re: DYN2 drive issues

    Quote Originally Posted by mactec54 View Post
    When you said 20 Amp Fuses, I hope that you are not using them in place of the 15A how you had it wired before, if so the same thing could happen, only ( 1 ) fuse and placed before the caps is the only place you can have a fuse in this design

    For wire being Twisted all except Ground
    Yes, I now only have 1 20A fuse installed on the + side between the caps and the PSU.

  3. #3
    Join Date
    May 2006
    Posts
    25

    Re: DYN2 drive issues

    What kind of rating are these fuses ? My system is after many years getting assembled and I would imagine 20 amps is 20 amps ac or dc but for a 48volt power supply calling for 20 amp fuse what fuse should i get?

Similar Threads

  1. taig/dmm/dyn2/acorn settings
    By Grascochon in forum Taig Mills / Lathes
    Replies: 3
    Last Post: 04-01-2020, 03:52 AM
  2. Dyn2 losing EEPROM settings
    By matth in forum Dmm Technology
    Replies: 163
    Last Post: 02-18-2020, 04:32 PM
  3. Linuxcnc/DYN2 DMM-Tech Drives using 5I25 _ 7I76 Combination
    By bill south in forum LinuxCNC (formerly EMC2)
    Replies: 1
    Last Post: 02-03-2020, 07:28 PM
  4. Linear Toroidal PSU for DYN2+400W DMM servos
    By rvectors in forum Dmm Technology
    Replies: 10
    Last Post: 06-25-2019, 07:11 PM
  5. 92 VF1 Drive issues
    By sak610 in forum Haas Mills
    Replies: 3
    Last Post: 07-15-2016, 10:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •