ok that sounds like you have it set to move to fast. your G00.
turn down your rapid speed and try it.
I have mine turned down just to make sure there is not a problem. plus what I am cutting (aluminum) i cut at 6 IPM and rapid at 15 or 20 ipm.
ok that sounds like you have it set to move to fast. your G00.
turn down your rapid speed and try it.
I have mine turned down just to make sure there is not a problem. plus what I am cutting (aluminum) i cut at 6 IPM and rapid at 15 or 20 ipm.
My little piece of the web!
http://users.adelphia.net/~wjdupont