Re: PCNC1100 considering a 5" vise
I have 2 5 inch Tormach CNC vises that I’m not using any more. I have 20 sets of Monster Jaw soft jaws that I’m probably not going to use.
I would take $550.00 plus the ride for both vises and the soft jaws.
If you’re interested, my email is [email protected]
I also have a 2011 Tormach PCNC 1100 that’s been sitting since June 2019 that my wife is ragging on me to get rid of.
My machine is equipped with Power Draw Bar, Foot Pedal, auto oiler, 4 each 1/4, 5/16, 3/8 and 1/2 inch set screw tool holders, and 6 each ER16 and ER 20 collet holders and a butt load of ER 16 and ER 20 collets.
I also have a 9X20 lathe that’s brand new and a Harbor Freight conventional mill.
I would consider $8,500.00 for all of it or I would consider a trade for an older PCNC 440 that’s still running the Mach III operating system.
The package deal includes my PCNC 1100, 2 5 inch Tormach CNC vises, and all the accessories that I mentioned above.
I can be reached at [email protected] or at 714-420-2453.
You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.