Yea I got lucky there - I had the exact same thought. I tried to program 401 Hz into PD072 before I went thru the trouble of doing this analysis...was pleasantly surprised it worked!
Results 1 to 20 of 27
Threaded View
-
03-23-2021, 03:05 PM #7
- Join Date
- Mar 2021
- Posts
- 13
Re: 0-10V Signal Not working w/ HY VFD
Reply With QuoteSimilar Threads
-
Invert signal from end sensor. Appointment signal as the emergency stop button.
By RuslanRobot in forum Dynomotion/Kflop/KanalogReplies: 3Last Post: 06-08-2019, 11:59 PM -
Emcoturn 465SM - sub spindle clamped signal not working right
By John_B in forum EMCO LatheReplies: 1Last Post: 05-19-2019, 12:26 AM -
ES-DH2306 (H2-2206) Easy Servo enable signal not working Active High only
By kornboy in forum LeadshineReplies: 0Last Post: 11-14-2017, 11:14 PM -
hall effect limit switches working, but signal too slow to mach3
By bcer960 in forum Gecko DrivesReplies: 15Last Post: 11-10-2014, 03:29 PM -
Step signal not working
By jrsaw27 in forum Mach MillReplies: 19Last Post: 02-28-2013, 12:04 AM
Tags for this Thread
Posting Permissions
