I do appreciate all the input I was just going to buy Gerry’s screen set but wasn’t sure it would work with old setup. This all started after a couple of failed button scripts to zero xy laser pointer.
Sent from my iPhone using Tapatalk
I do appreciate all the input I was just going to buy Gerry’s screen set but wasn’t sure it would work with old setup. This all started after a couple of failed button scripts to zero xy laser pointer.
Sent from my iPhone using Tapatalk
I'm confused. Are you using the BigTex screen, or the 2010 Screen?
Are you using the parallel port on your old PC?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hello, does anyone know what is the latest version of mach3 2010?
I'll have to look when I get home. But it hasn't changed in the last 8 or so years.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
thanks, I have the 2010-screenset-1.1.4 version for 3 years and wanted to know if there were any changes.
Greetings
No, that would be the latest version. There won't be any further changes.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Using Mach3 and want to purchase the mach3 2010 screen set. Im using the Mach3 USB controller by Bitsensor ( Attached ), is there anbody using it with 2010 screen set, or anbody know if it works with that Board. Thanks
Hello,
This Mach 2010 looks pretty good.
Do it works with chinese xhc mk4 ethernet board?
Regards
Any failings will be likely due to the Chinese board, not the screen set. Some of the Chinese boards are ...
Cheers
Roger
Hello, I bought the 2010 screenset a few years ago and it worked fine with the parallel port, now I'm trying to upgrade to USB or Ethernet but I can't get it to work. All movements are done well with the exception of Auto Zero
I wonder if anyone can help me, I have dealt with EC300 and NVCM6 v2.1 motion controllers
Thanks in advance.
Hello I just bought the 2010 screenset. Just making sure it is still supported and still I will get my download. Thanksl.
The last activity by ger21 was 06-12-2022 02:48 PM - you could try contacting him at cncwoodworker at comcast dot net