Well, the drivers can support up to 8+ amps (stepperonline dm860t). The motors are rated 2.8A and each motor has it’s own driver. I have set the Amps to 3.03A per driver.

The strange thing is that they do work perfectly if i just have the motors on the bench. They do get hot which is strange because the X-axis motor is connected to the gantry and stays cold. Both X and Y are the same motors and drivers with same settings.

The driver should also work because on the bench it does work.

As soon as i connect the motors to the gantry, the computer starts to freeze. I rechecked all connections but everything is okay. Even with new cables