603,946 active members*
2,041 visitors online*
Register for free
Login

Thread: DIY UHPC 7 Tonne CNC Bridge Mill

Results 1 to 20 of 88

Hybrid View

MikeGM DIY UHPC 7 Tonne CNC Bridge... 09-22-2022, 11:16 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-23-2022, 03:31 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-23-2022, 10:19 PM
asuratman Re: DIY UHPC 7 Tonne CNC... 09-24-2022, 02:03 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-24-2022, 06:53 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-24-2022, 10:17 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-25-2022, 12:47 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-25-2022, 01:39 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-25-2022, 02:14 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-25-2022, 09:21 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-26-2022, 08:14 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-26-2022, 09:22 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-28-2022, 05:43 PM
mactec54 Re: DIY UHPC 7 Tonne CNC... 12-17-2022, 06:33 AM
MikeGM Re: DIY UHPC 7 Tonne CNC... 12-17-2022, 07:28 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-28-2022, 09:23 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-28-2022, 11:36 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 09-29-2022, 04:49 AM
pippin88 Re: DIY UHPC 7 Tonne CNC... 09-29-2022, 10:28 AM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-29-2022, 10:28 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 09-29-2022, 11:49 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 09-30-2022, 12:17 AM
ozlemi Re: DIY UHPC 7 Tonne CNC... 05-23-2023, 09:55 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 09:10 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-29-2022, 10:56 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 09-30-2022, 02:34 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 09-30-2022, 09:55 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 09-30-2022, 09:59 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 09-30-2022, 08:56 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 10-01-2022, 02:07 AM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 10-01-2022, 04:59 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 10-01-2022, 05:47 AM
MikeGM Re: DIY UHPC 7 Tonne CNC... 10-02-2022, 03:47 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 10-02-2022, 09:03 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 10-02-2022, 11:22 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 10-03-2022, 07:01 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 10-03-2022, 08:20 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 10-02-2022, 08:23 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 10-03-2022, 09:36 PM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 10-03-2022, 10:39 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 10-03-2022, 10:50 PM
rajhlinux Re: DIY UHPC 7 Tonne CNC... 12-02-2022, 04:57 AM
jackjr-123 Re: DIY UHPC 7 Tonne CNC... 12-16-2022, 06:18 PM
MikeGM Re: DIY UHPC 7 Tonne CNC... 12-16-2022, 07:27 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 12-19-2022, 03:02 AM
mactec54 Re: DIY UHPC 7 Tonne CNC... 12-19-2022, 03:43 AM
Momentz Re: DIY UHPC 7 Tonne CNC... 12-31-2022, 06:48 AM
vnuEndru Re: DIY UHPC 7 Tonne CNC... 05-17-2023, 06:46 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 05-17-2023, 07:34 AM
vnuEndru Hi, Yes, you right, as far... 05-17-2023, 08:31 AM
joeavaerage Re: DIY UHPC 7 Tonne CNC... 05-17-2023, 08:46 AM
vnuEndru This is what academic papers... 05-17-2023, 08:43 PM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 12:12 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 05-17-2023, 08:53 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 05-18-2023, 04:17 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 05-18-2023, 07:26 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 05-23-2023, 10:33 AM
ozlemi Re: DIY UHPC 7 Tonne CNC... 05-24-2023, 06:52 AM
ozlemi Re: DIY UHPC 7 Tonne CNC... 06-06-2023, 08:58 AM
Mr-MaW Re: DIY UHPC 7 Tonne CNC... 06-10-2023, 07:45 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 10:44 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 10:48 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:06 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:20 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:23 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:28 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:46 AM
ardenum2 Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 11:50 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 12:18 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 12:23 PM
suspension Re: DIY UHPC 7 Tonne CNC... 08-10-2023, 12:30 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-16-2023, 08:01 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-16-2023, 10:29 AM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-16-2023, 10:35 AM
suspension Re: DIY UHPC 7 Tonne CNC... 08-16-2023, 12:05 PM
peteeng Re: DIY UHPC 7 Tonne CNC... 08-16-2023, 12:24 PM
Mr-MaW Re: DIY UHPC 7 Tonne CNC... 08-17-2023, 09:37 AM
  1. 12-19-2022, 03:02 AM #1
    peteeng is offline Member
    Join Date
    Jul 2018
    Posts
    6841

    Re: DIY UHPC 7 Tonne CNC Bridge Mill

    Hi Mactec - You mean 2000 Lb force (907kgf)not 2000 ft lbs (torque value)? Peter
    Reply With Quote Reply With Quote
  2. 12-19-2022, 03:43 AM #2
    mactec54 is offline Member
    Join Date
    Jan 2005
    Posts
    15362

    Re: DIY UHPC 7 Tonne CNC Bridge Mill

    Quote Originally Posted by peteeng View Post
    Hi Mactec - You mean 2000 Lb force (907kgf)not 2000 ft lbs (torque value)? Peter
    Yes, correct 2000 lbf. or 8896 N thrust
    Mactec54
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How to build a UHPC 4 Ft x 7 Ft CNC Router?
    By rajhlinux in forum CNC "do-it-yourself"
    Replies: 14
    Last Post: 06-27-2023, 02:39 AM
  2. My DIY Stone Bridge Saw
    By DennisCNC in forum Glass, Plastic and Stone
    Replies: 46
    Last Post: 07-27-2020, 03:29 PM
  3. DIY H-bridge
    By medved in forum CNC Machine Related Electronics
    Replies: 14
    Last Post: 06-26-2020, 10:05 AM
  4. Suggestions for building an large CNC router out of Epoxy granite or UHPC concrete
    By denhen89 in forum Epoxy Granite
    Replies: 2
    Last Post: 10-21-2019, 11:21 AM
  5. CNC bridge mill for cutting aluminum.
    By DICKEYBIRD in forum Vertical Mill, Lathe Project Log
    Replies: 27
    Last Post: 03-05-2017, 03:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules