He actually sent me the link. Thanks for the help jim
He actually sent me the link. Thanks for the help jim
From what I hear from my customers, the XHC boards are one of the worst when it comes to running macros. I've had some have a bit of success using the Chinese macros on my website, but others haven't been able to get it to work at all.
If you want to use the 2010 screenset, I'd only recommend an ESS or a CNC Drive controller.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi,
all development on Mach3 ceased eight years ago, as far as I'm concerned its obsolete.
Mach4 is the replacement and is light years ahead, and is still and actively being developed. It won't work with crappy Chinese made motion boards.
Craig
Hi i just bought the screenset too.
I now realised that it might not be available anymore ?
Is this project still active.
I'll try to send an email to him.
"a BL-UsbMach-V22 USB controller and I have the same problem"
you can not slave axis ?