Originally Posted by
Mooser
Today I was trying to get my Pathpilot computer (HP) to connect to my home network synology share and I guess I screwed something up
At first the clock was wrong so I got those errors and I swapped out the cmos battery for a new one and reset the clock.
Booted into pathpilot and flipped over into linux, added a new folder to the operator/gcode folder and then added a couple of lines to the fstab file to get it to mount the synology folder as a share.
Not a huge problem
Turn the controller off and then back on and it wouldn't turn on.. I forgot to reset the setting for what to do after a power outage so I fixed that.
Booted up and if gives my this new screen asking to boot pathpilot, try to troubleshoot and then repair using a disk....
I've never seen that before, figure maybe because it didn't boot right before or the settings have changed,
selected the boot pathpilot and it sort of hangs on the splash screen for way too long and then gives a new screen opps, the battery is probably dead, scan the qr code etc etc etc.
Checked the Tormach troubleshooting pages and everything matches that the battery should be replaced (tried 2 new ones that both test 3v) and it won't boot past that point.
The doc says to press the "f" key to test the drive but it doesn't recognize the key press, maybe that's a difference version
Did a DPS drive test through the bios and everything is fine, no errors (SSD if that matters)
My PP usb stick is 2.0.0 but I've updated a few times since then. Not sure where exactly I'm at right now, haven't changed it in a year or so
Anyways, any ideas???
Thanks