603,316 active members*
2,608 visitors online*
Register for free
Login
Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Sep 2012
    Posts
    230
    Is it possible your system is set to mm and you're programming in inches?
    What are your scale factors in setup, system?
    Eric Feldman - Design Engineer, Programmer
    Armor CNC - http://www.armorcnc.com Support hours: 7am thru 10pm EST, 7 days a week

  2. #2
    Join Date
    Oct 2024
    Posts
    14
    Quote Originally Posted by ericscottf View Post
    Is it possible your system is set to mm and you're programming in inches?
    What are your scale factors in setup, system?
    Alright so I checked the scale factor in the techno software and it is set to -800 on all M boxes. On the leg of the machine it says it should be -20320. Problem is when I put that in the machine will not move. Thoughts?

    Thank you to everyone who has replied.

  3. #3
    Join Date
    Oct 2024
    Posts
    14
    Quote Originally Posted by ericscottf View Post
    Is it possible your system is set to mm and you're programming in inches?
    What are your scale factors in setup, system?
    Alright so I checked the scale factor in the techno software and it is set to -800 on all M boxes. On the leg of the machine it says it should be -20320. Problem is when I put that in the machine will not move. Thoughts?

    Thank you to everyone who has replied.

Similar Threads

  1. Size of image-object cut too small using Inkscape, Makercam then Mach 3
    By JONLE in forum Uncategorised CAM Discussion
    Replies: 18
    Last Post: 10-10-2020, 06:11 PM
  2. LaserDRW How to Calibrate Wrong Cut Size?
    By roig12 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 01-18-2018, 07:30 PM
  3. wrong cut size
    By poorman56 in forum Machines running Mach Software
    Replies: 2
    Last Post: 02-10-2015, 03:58 AM
  4. Drawing Size and Cut Size Differ - Plasma
    By ADucci in forum LinuxCNC (formerly EMC2)
    Replies: 5
    Last Post: 10-05-2007, 10:52 AM
  5. Drawing Size and Cut Size Differ - Plasma
    By ADucci in forum Mach Plasma / Laser
    Replies: 0
    Last Post: 10-04-2007, 02:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •