[gimman]

Hi Drimaropoulos ,
Thank you for parameters , I will check and compare with my params
Heave you nice new year ,
Ion

[misako_gs]

hello Drimaropoulos;
We have DMU50 evolution 2000 millplus v410 machine ...
The hard disk of our machine is defective ...
Can you send me the bootable image copy of the hard disk of your machine (HDD) via email or dropbox ...


Thank you in advance for your help...
Best regards...
e-mail: misako_gs@hotmail.com

[Drimaropoulos]

Hello, I have send you an email with the help of wetransfer.com the .tib file. You will have to use Acronis True Image to make the hard disc with that file.
Regards John

[misako_gs]

Çok teşekkür ederim Drimaropoulos ...

[Idolcore]

Hi Drimaropoulos ,
Thank you for parameters , I will check and compare with my params
Heave you nice new year ,
Ion

Hi, I’m having a y axis position error that is floating on a Dmg 70 Evo 2004 mill plus. Do you know what parameter turns the scale on or off?

[Drimaropoulos]

Hi, I don't thing you can just turn off the scale from the controller, the scale is part of the positioning closed loop of the system.

[AlesDM]

Good day! Need help setting up PC BIOS and HDD image to recover DMU50V. Thanks in advance!

[AlesDM]

Please tell me what the error means (operating mode 3), appears after loading CNC. DMU50V 2000 DDC/SDC.

[Ibero]

Good day! Need help setting up PC BIOS and HDD image to recover DMU50V. Thanks in advance!

Hi,I have a bios manual and a exm settings.I can share.

[Drimaropoulos]

HI Drimaropoulos
I have a DMU 50 V with millplus controlle.
My machine hard disk got crashed.
I need your machine hard disk data.
Can anybody help with their machine hard disk backup data?
I want your machine backup.
My email address is abtautomation8@gmail.com

Thank you in advance for your reply

Regards
Thanakrit

Hi i have send you PM with a link to download the HD, in the send items i cant see the PM plz verify.
Regard John

[Feinwerktechnik_Boesl]

Hi Drimaropoulos,
do you still have an Copy to create a bootable Millplus-Disc?
The HDD on my DMU 60 had an Head Crash and i would like to try your Backup.

Thank you very much in advance for your supply

Regards
Sebastian

[montoyaguy]

Can any one help me out I have a DMU 50 with Philips drives my HDD crashed I do have the machine parameters please email me robertisthisguy@gmail.com

[Drimaropoulos]

Hi, i am trying to pm you but i cant.

[LiderMakine]

Hello, I have many mechanical, electrical, programming, parameter, alarm, indramat servo systems books and files, I can help you if you wish.
I suspect that my Philips CNC 5000 series CPU card is faulty and the EPROMs have erased their data. Where can I find the EPROM data?

[gordankrota]

hi, drimaropoulos, we have also HDD problem ,coud you send me image on gordankrota@yahoo.com, thanks

[MAJIDTAERKAZEMY]

Hello, I have many mechanical, electrical, programming, parameter, alarm, indramat servo systems books and files, I can help you if you wish.
I suspect that my Philips CNC 5000 series CPU card is faulty and the EPROMs have erased their data. Where can I find the EPROM data?

Hello
I have problem to connect the Siemence840di c controller to DAA01.1 indramat driver enable and ready signals.
I mean , from where should the 24VDC comes for these two signals (RF & AH signals?
I have not so much time to solve this problem .
Please help me .
Sincerely yours
Majid