Fanuc USA, Ebay or Google for repair/suppliers of Fanuc parts.
If you get a used board, you may have to swap the eproms (memory IC.s) from one to the other.
Also you will need to record all the parameters for reloading, unless you have bubble memory.
Al.
Results 1 to 15 of 15
Hybrid View
-
05-14-2007, 08:56 PM #1
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With QuoteSimilar Threads
-
Connected-disconnected loop
By geppo in forum Dynomotion/Kflop/KanalogReplies: 2Last Post: 03-16-2014, 04:38 PM -
"master encoder state error" AB ultra100 error message
By ShapeShaver in forum Servo Motors / DrivesReplies: 3Last Post: 07-31-2013, 04:09 PM -
hurco hawk x axis encoder error or is it.
By nealg in forum HURCOReplies: 12Last Post: 07-01-2013, 06:36 PM -
atc encoder error on ultimax 3
By judleroy in forum HURCOReplies: 2Last Post: 08-08-2008, 08:51 AM -
tacho generator disconnected
By scr in forum DNC Problems and SolutionsReplies: 11Last Post: 07-16-2007, 04:28 PM
Tags for this Thread
Posting Permissions
