Have a guy that wants me to build gantry and electronics of MechMate machine driven by Mach3. Only problem is he wants a 5HP spindle and I don't know anything about different brands. I am looking for sugestions. Cost is probably not a issue.
Have a guy that wants me to build gantry and electronics of MechMate machine driven by Mach3. Only problem is he wants a 5HP spindle and I don't know anything about different brands. I am looking for sugestions. Cost is probably not a issue.
Here's one option. http://www.ekstromcarlson.com/spindle%20motors.htm
Other common spindles are made by Perske, Columbo, and HSD.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hi Ger21,
Spindle motor. It's low cost or not? I need to hobby price but high quality
Cheers
Mongkol
They start at about $1500-$2000 and go up fast as size increases.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)