[myxpykalix]

heres a butterfly maiden on horseback (fantasy)

[tobyaxis]

tobyaxis,

I "checked it out" and you've done another superb job on the turbine. Thanks for posting it in the 3D Adobe Acrobat/Publisher PDF format, too, so that we could see the full effect of your Alibre 3D design. Just checking, but isn't the turbine supposed to have a through hole so it can be mounted on a drive shaft?

Not to turn this into a BobCAD debate or digression, but, since I know your a power user , does Alibre export a 3D file type compatible with BobCAD? Inquiring minds will want to know.


I hope you're doing well,

First question, Yes there is supposed to be a Bore through the Part. LOL, I didn't know how to do it at that time.

Second question, Alibre Design will Export STEP File Formats for BCC, any Version.

Some additional information, this is the FREE Version of Alibre. Plus these parts would have taken a lot longer without the Help and Guidance of Tjones. You should see the Parts he makes. Tjones makes Alibre look just as good if not better than SolidWorks.

Here is the next Fun Learning Experience in Alibre, Adobe, Picture, and STEP File.

BTW: Thanks for the kind words:rainfro:

Cheers and Enjoy!!!

[davek]

And divot tool

[dan dimock]

I have been buying my bits from this guy 1/8 and 1/16 in for about a dollar each. If you need any, check this out.

http://shop.vendio.com/MoranEnt/category/3947/

Just wanted to pass this along
Dan

[cnc metalcraft]

Dose anyone have drawing of money im doing a 2 1/2D one of the 100 but i like a vector one :wave:

[scott wiggins]

This money thing might draw more attention than you like!!!

[w.jansen]

Hay Jimini

Do you have a picture of how to put all this together ?

Thanks:
Willem

[Reginaldo]

cool

[jimini]

Hay Jimini

Do you have a picture of how to put all this together ?

Thanks:
Willem

I've forgotten what the file is of, if you let me know I'll see about some pictures. jimini

[Reginaldo]

+

[kram242]

Cool Files thanks Reginaldo!..
Ill never figure out how that Dragon one goes togeather
Mark

[chojin]

Can somoene post an example of a PCB board done in CAD?
I am trying to figure out how to draw one in Solidworks but I dont know where to start.

The design is done and drawn on paper and I did a mock up in Visio but when I save it as a DWG, it comes out funny.
Thanks

[dan dimock]

Reginaldo;

Do you have a picture of the dragon?

I would like to know how large he is and what you cut it out of.

Thanks;

Dan

[rcpilot82]

OK, I'm new here and am in the process of "parts gathering" for my cnc router. question is does anyone have a file for (I can't believe I'm posting this) bunnies? We have 3 as pets and i'd like to make a few cutouts with there names for the hutches they live in. thanks in advance.
Robby

[Reginaldo]

Thanks, kram242 , dan dimock.
I obtained this figure of dragon, I wait that it helps you.
very good: http://www.laserteile.ch/5392269876110b501/index.html
http://www.finescrollsaw.com/freepatterns.htm

[Reginaldo]

Thanks Kram242, Dan.
I hope this picture can be useful.

Here it go some links with some good stuff:

http://www.laserteile.ch/5392269876110b501/index.html
http://www.finescrollsaw.com/freepatterns.htm

[Weldtutor]

does anyone have a file for (I can't believe I'm posting this) bunnies?

Is a Rabbit a Bunny?

Two to choose from that might be suitable.

[myxpykalix]

I'm looking for a more detailed larger picture of a Centurion. Any type of file you have would be appreciated. Here is an example. Thanks!

[rcpilot82]

Is a Rabbit a Bunny?

yeah, same thing,lol. thanks for the files!

[smoregrava]

Here is a PCB I milled out in my small benchtop cnc (Emcotronic F1P CNC). I have done a couple of these cards. The card is made by the freeware winqcad 37.0 by microcad. Made a dxf from that and did some modifications in Edgecam and made the G code.