BTW, the term is Cutter Radius (or Diameter) Compensation, or CRC.
The codes that control CRC are
G40 Cancel compensation
G41 Compensate Left (For climb cutting) <---- standard on CNCs
G42 Compensate Right (For conventional cutting) <---- standard on manuals
Thread: NewB Q. Tool sizes
Results 1 to 3 of 3
Hybrid View
-
05-20-2004, 04:05 PM #1
Registered
- Join Date
- Apr 2003
- Posts
- 1876
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
HELP Tool changer problems
By ddprecision in forum Haas MillsReplies: 10Last Post: 07-18-2016, 02:30 PM -
Tool length sensing!
By Swede in forum FlashCut CNCReplies: 19Last Post: 05-07-2013, 04:38 AM -
Miniature Automatic Tool Changer
By 1ctoolfool in forum News AnnouncementsReplies: 1Last Post: 04-18-2005, 11:56 AM -
Pocketing and tool sizes
By jderou in forum BobCad-CamReplies: 1Last Post: 08-31-2004, 07:26 PM -
Tool Changer Problems
By Snel in forum Haas MillsReplies: 5Last Post: 08-11-2004, 02:56 PM
Posting Permissions
