Hi Rai,
Pls check your email.
Normally, you can try to take off the PMC card from mother board then power on. If the system boot up to normal status I mean at Position page but getting EMG or Not Ready that mean your PMC card is trouble else your mother board having problem. This can be run without PMC system. Some Fs-Omc can also ruuning IPL mode like the procedure follow,
1. Power off
2. Press 7 & 9 or -(minus) & . (point) together then the system ask will you to run the system without PMC then press Y to accept the condition then if the machine can boot to normall status you have to replace PMC-M card or ROM / OE1 and OE2 that you have to call Kafo directly. You can ask William at Kafo to help you.

Thanks!