Hi,
I had bought three 42S33-03 stepper motors and i dont know wich wire is wich. I need to know wich two are the ones that i have to connect to the power supply (12v 0.3a each).
You can see the datasheet diagram in the attached image or clicking the following link...
http://img211.imageshack.us/img211/4282/wirespt4.jpg
I had also built the pic bases controller that i found in the open source section...
http://www.pminmo.com/3axisPIC/3axisPIC.htm
I cant get it working
Thansk a lot
Martin