Hello All,
I have a 1993 Fadal VMC20. The tool carousel will not rotate CCW either manually or by command. This problem just started yesterday, have had no problem with this before. I would really appreciate any help.
Thanks,
gamila
Hello All,
I have a 1993 Fadal VMC20. The tool carousel will not rotate CCW either manually or by command. This problem just started yesterday, have had no problem with this before. I would really appreciate any help.
Thanks,
gamila
Check relays K11, K5 and fuse F5 these are the controls for the turret reverse.
Neal
Neal,
I swapped K11 and K12 relay boards and it is working fine. There must have been crud or something on them.
Thank you!!
gamila