Most noise comes from the vari drive. The bushings in the movable disks wear out and rattle. But they are still running in neutral. What is not running is the spindle and bull gear with its supporting bearings.
George
Thread: Bridgeport 2J head noise
Results 1 to 8 of 8
Threaded View
-
02-15-2008, 02:27 PM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Noise in Bridgeport 2J head (audio file included)
By daytrader in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 08-03-2016, 07:03 PM -
noise in bridgeport series one
By alex 850 in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 11-07-2007, 06:05 AM -
noise level of 3600 RPM motor with gear head
By Runner4404spd in forum Charter Oak Automation Support ForumReplies: 10Last Post: 12-10-2006, 08:42 PM -
TAIG "head" makes alot of noise
By Smertrios in forum Taig Mills / LathesReplies: 17Last Post: 02-25-2006, 11:25 PM -
M-Head Bridgeport for $650 - E-bay
By mxtras in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 09-13-2005, 03:39 PM
Posting Permissions
