[parveenk78]

Dear Sir,
thax for reply my message. i talked to my dealer about this post proccessor i have a a complete seat of VISI CAD CAM and MOULD DESIGN. so he can help me about this post. but he also don't have any exp. with maho . so he need a complete program of this controller so that he cam study the nc file and can made the post . so i m requesting you please send me any complete program to me which should have milling drilling operation and have circular interpolation also i mean a complete file it will be help full for me .
i m relly thank full for this discussion with you .
thank u so much in advance
Take care
Parveen

[smoregrava]

Yes I send you a program to morrow. you find some examples on my site. Drilling examples.

I never do drilling and milling in the same program because I don't have toolchanger so. Drilling is one program a milling another program.

He should check the site to find all the M and G codes He will need that.

And maybe the moust important thing. Y and Z axis has to be exchanged and X axis has the opposite direction.

would you share your post with us when it's done? I would like to have it on my web page.