Threading ?
Al right lets see if I can explain this.
I was wondering if there is a way to make make the machine when threading to come to the end of the thread and stop (not meaning stop the machine) in the z and then retact in the x instead of leading out on the last thread I know this would make a sold line in the part but it is relived at the end so it doesn't mater.
the machine has a fanuc oi-tb
code is as follows
N300M01
G0T0000M8
(THREDING SECO INSERT 16ERAG60-A CP500)
(7/16-14 MAJOR .4361/4258 PITCH .3897/.385 MINOR .3511)
G97S200M3
X.4471Z.3T0000
G76P010060
G76X.3511Z-.995P480Q170F.07142
G28U0W0T0000
Thank you for your input,
Kyle
You must remember that 99% of my posts are Bullchit!