Originally Posted by
Pmp Audio
Hi,
I'm 90% sure the air is leaking from the bottom of the spindle or rather this is where the leak is most noticeable. Just to add to the air leak, the inline oiler reservoir was missing a gasket/O ring also under the rear access panel there is a manifold/control valve that was leaking from an aluminum cover that is fastened by two screws after removing the cover there wasn't a gasket/ O ring either. The spindle belt looks to be tethered as well. I was told this machine would be turnkey it's kind of looking not so turnkey.
Oh, I have poured over the control panel being this is the first CNC mill I ever owned to better understand the machine and don't recall seeing a machine ready button what so ever.
Thanks for the replies,
Eric